HP StorageWorks XP Remote Web Console Software - Manual (Page 81)

Description Icon
Port in Initiator/External MIX mode.
Port Operation list
Displays ports in the local array that XP External Storage can use or set. The port information displayed
corresponds to the item selected in the Port tree.
You can sort the list by attribute. For example, to sort by port numbers, click Port on the list.
Rows corresponding to ports that are about to be acted upon appear in the Preset list, and the
corresponding row in the Port Operation list appears in blue italics.
Figure 39 Port Operation list
.
• Port
Port number. One of the following icons appears for each port:
Description Icon
Port in Standard mode.
Port in High Speed mode.
Port in Initiator/External MIX mode.
• Attribute
Port attribute. External ports are used for connecting to the external array. To set a remote command
device, you can use the port for which the Initiator/External MIX mode has been set.
• PCB Mode
Port's PCB mode. Standard, High Speed, or MIX (for Initiator/External MIX mode) appears. External
ports do not have High Speed mode. For more information about the PCB mode, see the HP
StorageWorks XP LUN Configuration and Security Manager user guide: HP XP12000 Disk Array,
HP XP10000 Disk Array, HP 200 Storage Virtualization System. For more information about the
Initiator/External MIX mode, see
Using Continuous Access XP or Continuous Access XP Journal
with remote command devices .
Preset list (Port Operation pane)
This list displays rows from the Port Operation list that are about to be acted on. Check the contents
of the Preset list before applying them to the local array. Contents displayed in the Preset list appear
in blue italics in the Port Operation list. When you click Apply in the Port Operation pane, actions
designated in the Preset list are applied to the local array and the contents of the Preset list disappear.
XP External Storage Software User Guide 81