Avenview RTERM Series - Manual (Page 30)

www.avenview.com 30
2.5 Local Keyboard Command in Native Mode
Commands
Key Sequence by keyboard Style
Enhanced PC
Toggle CAPS LOCK on/off CAPS LOCK
Toggle NUM LOCK on/off NUM LOCK
Put terminal in SETUP mode ALT ESC
Partially reset terminal, including communication
unlock keyboard, turn off all print modes.
ALT PAUSE
Send break*1 BREAK*2
Toggle between block and full-duplex modes SHIFT BREAK
Print Screen formatted PRINT SCREEN
Turn auxiliary print mode on/off SHIFT SYS REQ*3
Turn monitor mode on/off CTRL SHIFT 1 (kpd)
Turn status line display on/off CTRL
Speed scrolling rate CTRL SHIFT
Slow scrolling rate CTRL SHIFT
Home cursor and clear page CTRL SHIFT HOME
Display page 0 CTRL 0kpd
Display page 1 CTRL 1kpd
Display next page (or active other window)*4 PAGE DOWN
Display previous page (or active other window)*5 PAGE UP
Toggle between split screen*5 and full screen format CTRL SHIFT -kpd
Toggle Session 0 *6 ALT F1
Toggle Session 1 *6 ALT F2
Toggle Session 2 *6 ALT F3
Toggle Session 3*6 ALT F4
Toggle Session 4*6 ALT F5
Toggle Session 5*6 ALT F6
Toggle Session 6*6 ALT F7
Toggle Session 7*6 ALT F8
Toggle Session 8*6 ALT F9
Toggle Session 9*6 ALT F10
Toggle Session A*6 ALT F11
Toggle Session B*6 ALT F12
Close the active Session by Local Terminal*6 CTRL SHIFT . kpd
*1. To MODEM port only when configured as data port: has no effect on AUX port.
*2. [BREAK] = [PAUSE] pressed together with [CTRL].
*3. [SYS REQ] = [PRINT SCREEN] pressed together with [CTRL].
*4. If screen is split.
*5. Splits screen at line 12.
*6. Only active at Ethernet mode on.