Avenview RTERM Series - Manual (Page 66)

www.avenview.com 66
6.3.2 Upgrade from Web Page
Key in TFTP server IP address and image file name, then click Apply.
After a few seconds, the message Flash program finished successfully will be shown, meaning the new firmware
has been upgraded into the Flash memory.
If you want to run the new firmware, you need to click the Reboot item, then Yes to confirm to reboot the
system. It will take about one minute to finish the system reboot. When the IPCS unit finishes the startup and
working normally, the Ready green LED will blink every second.