Avenview RTERM Series - Manual (Page 43)

www.avenview.com 43
2.8 Device Setup
2.8.1 Setup the IP address from Ethernet Port
In addition to VT100 interface, we also provide a Network Setup Software tool (IPCS Setup) fro the network
settings to the IP Serial Console.
The Operation procedures are as follows:

Run the software tool IpcsSeeker.exe

Click Search Devices to find out the IP serial console device on the network. After few seconds, the
MAC addresses of found devices will show on Device MAC address field.

Select the MAC address on Device MAC address, and then click Query Device to get the device
configuration on the right pane.

If you want to change the settings, Enter the Super user name & password. Change the settings on
the right pane. Then click Update Device. The new settings will be saved to the IP serial console unit.
Then the unit will reboot automatically.
Access IP Serial Console
Using the HTTP protocol and entering the configured IP address of IP KVM switch into the web browser
to remote access the IP KVM switch.
With successful connection to IP KVM, the login page will show as below, then key in the default user
name & password When connecting to the IPCS unit, the IPCS system (web server, Telnet server or
SSH server) will prompt user to enter the user name and password in order to access to the system.