Avenview RTERM Series - Manual (Page 61)

www.avenview.com 61
Section 6: System Settings
6.1 System Administration
6.1.1 User Administration
At startup of the AP, the system will prompt user to enter the password to access to the system. The
administrator can add or remove a user easily via the web pages.
There are two levels of access privileges:
User Name Default Password Access Privileges
root root Full access
(user define) (user define)
Can only access Serial Port and
System Status & Log
Note:

The first character of User name must be alphabet

The password should be at least 3 characters long

The user name or password must not be longer than 32 characters

Only root user has access to Network and System Administration
6.1.2 Add User
To add a user:

Check the users at the User Administration Screen

Click the button Add