Connector pin assignment, Command guide, 6 connector pin assignment – Avenview RTERM Series User Manual
Page 31: 7 command guide
www.avenview.com
31
2.6 Connector Pin Assignment
Console port & serial port ping assignment
Pin
Signal
Direction
1
DSR
In
2
RTS
Out
3
GND
-
4
TxD
Out
5
RxD
In
6
DSR
7
CTS
In
8
DTR
Out
2.7 Command Guide
Commands Supported in ASCII Personalities
Below table lists all the ASCII commands recognized by the terminal. The native mode code for the command is
given in the second column. (The native mode includes WY-325, WY-120 and WY-60.) The remaining columns
show the support for the command in other ASCII personalities according to the following notations:
Same -
Same as native code (code is native to other terminal also)
Wyse -
Same as native code (Wyse enhancement- code not native to other terminal)
ENH -
Same as native code when enhance mode is on
(Wyse enhancement - code not native to other terminal)
A code listed under a non-native personality indicates that the related terminal’s native code is supported.
A blank in any column indicates that the command is not supported.