Avenview RTERM Series - Manual (Page 44)

www.avenview.com 44
There are Two levels of access privileges.
User Name Default Password Access Privileges
root root Full access
(user define) (user define) Limited access to Serial Port
The administrator can add or remove a user easily via the web pages of System administrations.
2.8.2 Web Management Interface
The IP serial console (IPCS) supports both HTTP and HTTPS (HTTP over SSL) protocols. The user must
authenticate themselves by logging into the system with a correct user name and password.
To access the IP serial console Web management pages, enter the pre-set IP address or resolvable hostname
into the web browser’s URL/Location field. This will direct the user to the login screen.
Figure below shows the user homepage of the Web management interface. A menu bar, provided on the left
hand side of the screen. Selecting an item on the menu bar opens a tree view of all the submenus available
under each grouping. Selecting a submenu item will allow the user to modify parameter settings for that item.
Every page will allow the user to Save to flash, Apply or Cancel their actions. To apply all changes made, the
user must select Apply. Only when the user selects Apply will the new parameter values be applied to the IP
serial console configuration and go effective. But new settings are not saved to non-volatile memory (Flash)
unless user click Save to flash button.
If the user does not want to save the new parameter values, the user can click Cancel. All changes made will be
lost and the previous values restored.