Avenview RTERM Series - Manual (Page 59)

www.avenview.com 59
4.3 Serial-to-Serial Function
4.2.1 Serial-to-Serial Function
The web page also gives read-only settings of Serial-to-Serial function, it will auto-changed upon the setting
change on VT100 console. Click Cancel will refresh the values.
4.2.2 Serial Power Control Function
The Serial Power Controller (SPC) is a family of intelligent power distribution units that enables remote power
control of servers and network appliances. When used in conjunction with IP Console Servers, the SPC provides
comprehensive management capabilities and quick problem resolution by integrating console access with
power control into a single interface.
The SPC support both RS232 and RS485 interface. With RS485 mode, the SPC can be located up to 1.2km away
from the controlling master, and has the Daisy- chain capability.
For detailed operation, please refer to the User Manual of Serial Power Controller.