HP StorageWorks XP Remote Web Console Software - Manual (Page 58)

Function Command
Deletes the V-VOL group and V-VOLs in that V-VOL group. You can select this
command only when you right-click a V-VOL group icon.
Delete V-VOL Group
• V-VOL list (right area of the pane): Information about V-VOLs registered in the VDEV selected in
the V-VOL group tree. The following items appear in the list:
• CU:LDEV: V-VOL's CU and LDEV numbers
• Capacity: V-VOL's capacity
• Emulation: V-VOL's emulation type
NOTE:
If the emulation type is followed by CVS, the volume is a custom volume (CV). For more
information about CVs, see the HP StorageWorks LUN Configuration and Security Manager
XP user guide for the XP12000/XP10000/SVS200.
• Status: V-VOL's status
• Normal
• Blocked
• CLPR: CLPR number of the CLPR to which the V-VOL belongs
• Access Attribute: V-VOL's access attribute
• Path: V-VOL's LU path
• Apply button: Applies operations performed in the V-VOL pane to the array. If the specified oper-
ations complete successfully, content displayed in blue italic in the V-VOL group tree or V-VOL list
changes to normal black.
If an error occurs during the operations, the error code and message appears in the error message
pane.
• Cancel button: Cancels all operations performed in the V-VOL pane.
Creating new virtual volumes
1. Change Command View XP or XP Remote Web Console to Modify mode. For instructions, see
the HP StorageWorks Command View XP user guide for XP Disk Arrays or the HP StorageWorks
XP Remote Web Console user guide for XP12000/XP10000/SVS200.
2. On the V-VOL pane, right-click Subsystem in the V-VOL group tree, and select New V-VOL Group.
The New V-VOL Group pane (
Figure 13 on page 60) appears.
3. Enter the V-VOL group ID in the V-VOL Group list.
NOTE:
You can select or enter only a whole number from 1 to 8192 in V-VOL Group. Do not enter
a number that is already used for another V-VOL group.
4. Select the V-VOL group's emulation type from the Emulation Type list.
5. Select the CLPR number of the CLPR in which you want to register the V-VOL group from the CLPR
list.
XP Snapshot operations 58