240 vac only, Miracle steamer, Warning – Antunes, AJ MS-150/155 User Manual

Page 7: Installation

Advertising
background image

MIRACLE STEAMER

7

P/N 1010699 Rev. M 12/06

Unpacking

1. Remove the unit and all packing materials from

the shipping carton.

2. The unit should come with the items listed below:

• Owner’s Manual

• Authorized Service Agency Directory

• Inlet Hose Assembly (MS-250/255 only)

• Spatula Assembly (MS-150/250 only)

• Drawer Assembly (MS-155/255/355 only)

NOTE: If any parts are missing or damaged, con-

tact Antunes Technical Service IMMEDIATELY at

1-877-392-7854 or 1-630-784-1000.

3. Remove all packing materials and protective cov-

erings from the unit.

4. Remove and wash all removable parts in soap

and water. Rinse with clean hot water and allow

to air dry.

5. Wipe all surfaces of the unit with a hot, damp

cloth.

NOTE: Do not use a dripping wet cloth. Wring out

before use.

6.

MS-150/250 Models: Assemble the

INSTALLATION

Figure 1. Assembling Handle–MS-150/250 Only

Bolt

Handle

Spatula

Handle Guard

THIS UNIT IS DESIGNED TO
OPERATE ON 208 VOLTS
ONLY
. APPLICATION WITH ANY
OTHER VOLTAGE SUPPLY
COMPLETELY VOIDS ALL
WARRANTY
. PLEASE CHECK
YOUR LINE VOLTAGE BEFORE
INSERTING THIS PLUG INTO THE
RECEPTACLE.

WARNING

WARNING

THIS UNIT IS DESIGNED TO
OPERATE ON 120 VOLTS
ONLY
. APPLICATION WITH ANY
OTHER VOLTAGE SUPPLY
COMPLETELY VOIDS ALL
WARRANTY
. PLEASE CHECK
YOUR LINE VOLTAGE BEFORE
INSERTING THIS PLUG INTO THE
RECEPTACLE.

WARNING

WARNING

120 VAC

ONLY

208 VAC

ONLY

THIS APPLIANCE MUST BE

EARTHED (GROUNDED)

THIS APPLIANCE MUST BE

EARTHED (GROUNDED)

THIS APPLIANCE MUST BE

EARTHED (GROUNDED)

THIS APPLIANCE MUST BE

EARTHED (GROUNDED)

THIS UNIT IS DESIGNED TO
OPERATE ON 220-240 VOLTS
ONLY
. APPLICATION WITH ANY
OTHER VOLTAGE SUPPLY
COMPLETELY VOIDS ALL
WARRANTY
. PLEASE CHECK
YOUR LINE VOLTAGE BEFORE
INSERTING THIS PLUG INTO THE
RECEPTACLE.

WARNING

WARNING

220-240

VAC ONLY

THIS APPLIANCE MUST BE

EARTHED (GROUNDED)

THIS APPLIANCE MUST BE

EARTHED (GROUNDED)

Guard and Mounting Bolt to the Spatula as shown in

Figure 1.

7. Install the Wire Trivet into side slots on Spatula.

8. Re-install all removed parts.

Wire Trivet

Advertising