Miracle steamer, Installation (continued) – Antunes, AJ MS-150/155 User Manual

Page 8

Advertising
background image

MIRACLE STEAMER

8

P/N 1010699 Rev. M 12/06

CAUTION

All electrical connections must be in accordance

with local electrical codes and any other appli-

cable codes.

PLUMBING
NOTE: Miracle Steamer models are designed to

use cold tap water. Distilled water may be used

to reduce calcium/mineral deposit build-up and

reduce maintenance costs.

CAUTION

This equipment is to be installed to comply with

the basic plumbing code of the Building Officials

and Code Administrators, Inc. (BOCA) and the

Food Service Sanitation Manual of the Food and

Drug Administration (FDA).

READ

Y

Figure 2. Filling Water Tank–MS-150/155

Filter

Sliding Cover

READY

ADD

WATER

Figure 3. Filling Water Tank–MS-355

Indicator Light (Low water)

Model MS-150/155 & MS-355

The MS-150/155 & MS-355 models have a self-con-

tained water tank. To fill the self-contained water tank:

1.

MS-150/155: Open the sliding tank cover on top

of the unit (Figure 2).

NOTE: Make sure filter inside tank is installed

properly.

MS-355: Open the sliding tank drawer on the side

of the unit (Figure 3).

2. Pour in

cold tap water. The tank will hold

approximately 3 quarts (2.81 liters).

3. Close the sliding tank drawer.

INSTALLATION (continued)

Tank

CAUTION

Be sure to follow all safeguards and precautions

in the Important Safety Instructions section of this

manual.

Tank

CAUTION

Do NOT overfill the unit water tank. Fill the tank to

90% full ONLY.

Advertising