HP e-Commerce Server Accelerator sa7120 - Manual (Page 128)

C H A P T E R 7 HP e-Commerce Server Accelerator SA7100/SA7120 User Guide
118
Extended Data
LINKD: indicates no carrier.
10HDX: indicates 10Mb/s, half duplex.
10FDX: indicates 10Mb/s, full duplex.
100HDX: indicates 100Mb/s, half duplex.
100FDX: indicates 100Mb/s, full duplex.
Alarm Logging
The SA7100/SA7120 maintains a circular buffer of alarms issued.
The most recent alarms, as well as historical logs generated and saved
as a result of exceptional conditions, are viewable at the console or in
Telnet or Secure Shell (SSH) remote sessions. Viewing the current
alarms results in an immediate dump of the alarm buffer.
The historical logs consist of a snapshot of the information retrievable
via the status line command followed by a dump of the alarm buffer
existing at the time of the exceptional condition.
These alarms can be viewed on the console using the CLI command,
status alarms. Additionally, any logs generated and saved as a result
of an exceptional condition are viewable by using the CLI command,
status <log filename>. (A list of the viewable log files is displayed
using the list logs command.)
Alarms can be echoed to the console by enabling the monitoring
function. Monitoring reports are disabled by default, and are enabled
with the set monitoring <enable | disable> command. The
monitoring application is aware of the port on which the enable
command arrives, and accordingly sends reports to that same port,
thus monitoring reports are displayed on the same console from
which the feature is enabled.
Below are examples of the CLI commands for log viewing, the
defaults, and ranges where applicable:
Example: list logs command:
HP SA7120> list logs
20000727_145544