HP e-Commerce Server Accelerator sa7120 - Manual (Page 47)

C H A P T E R 4 Scenario 1—Single Server
37
4. You can delete the default mapping. After the user has manually
created the mapping, the default mapping can be deleted. In this
case, delete MapID number 1. MapID number 2 becomes
MapID number 1 when the default is deleted.
HP SA7120> delete map 1
HP SA7120> list maps
Map Net Ser Cipher Re- Client
ID KeyID Server IP Port Port Suites direct Auth
== ===== ========= ==== ==== ====== =====
====
1 myserver 10.1.1.30 443 80 med(v2+v3) n n
HP SA7120>
5. Save the configuration when the server has been mapped.
HP SA7120> config save
Saving configuration to flash...
Configuration saved to flash
HP SA7120>