HP e-Commerce Server Accelerator sa7120 - Manual (Page 51)

C H A P T E R 4 Scenario 3—Multiple SA7100/SA7120s, Cascaded
41
Procedure for
Scenario 3 1. Configure the SA7100/SA7120 farthest from the server as
described in any of the preceding scenarios. Remain connected to
that specific SA7100/SA7120 for the export configuration
procedure.
2. At the command prompt, type the set spill enable command.
This allows overflow traffic to be transferred to the second
SA7100/SA7120 for processing.
3. Save configuration.
HP SA7120> config save
Saving configuration to flash...
Configuration saved to flash
HP SA7120>
4. Export the configuration. Use the export config command.
Choose xmodem mode to export.
HP SA7120> export config
Export protocol: (xmodem, ascii) [ascii]: xmodem
<Enter>
Beginning export...
5. Select Receive from the HyperTerminal* Transfer menu.
6. Type or use the Browse button to specify the directory in which
you want to place the received file.
7. Select xmodem as the receiving protocol.
8. Click the Receive button.
9. Specify a filename for the received file and click OK. The
operation concludes and the normal prompt reappears.
Use Ctrl-X to kill transmission
Export successful!
HP SA7120>
10. Connect to the second SA7100/SA7120 (“Device 2”), either
through the console connection or another window (if both are
connected to the same PC).
11. Press the Bypass button on Device 2’s front panel to put the
machine in bypass mode.
12. Import the configuration. Use the import config command to
begin the process. Select xmodem and press Enter to begin the
import process.
HP SA7120> import config
Import protocol: (paste, xmodem) [paste]: xmodem