Status check, Network and server leds, Inline led – HP e-Commerce Server Accelerator sa7120 User Manual
Page 18
C H A P T E R 2 HP e-Commerce Server Accelerator SA7100/7120 User Guide
8
5. At this point both the Network and Server LEDs should be
steadily illuminated. If not, please see Chapter 9,
“Troubleshooting.”
Network Connections
Status Check
Before proceeding to the Admin Terminal Connection section, take a
moment to verify that the SA7100/SA7120 is correctly connected.
Network and Server LEDs
Verify that the Network and Server LEDs are both illuminated. If one
or both are not, refer to the Troubleshooting section at the end of this
chapter.
Inline LED
A blinking Inline LED indicates that the system is online in Fail-safe
mode. Refer to the Troubleshooting section at the end of this chapter
or Appendix B, “Failure/Bypass Modes.”
HP e-Commerce Server Accelerators
Hub/Router/Switch
Server