EOTech CNVD-T (SU-232/PAS) Clip-On Night Vision Device - Thermal - Manual (Page 32)

2-16
2.12.4 Reticle Intensity (RETINT) . Activating the RETINT
menu item allows the operator to adjust the color of the
reticle from white, through the gray scale to black, to provide
the best contrast with the viewed image.
Figure 2-11 Menu – Reticle Intensity (RETINT)
During adjustment, a color scale is presented in the
eyepiece display as shown in Figure 2-12.
Figure 2-12 Reticle Intensity Control
Reticle intensity is adjusted by pressing the UP / DOWN
buttons to move the status bar along the WHITE / BLACK
scale. If the UP / DOWN buttons are not pressed within 3
seconds, the reticle intensity scale will disappear and the
CNVD-T will revert to normal viewing mode. The unit may
RETICLE
WHITE
BLACK
Status Bar
ZOOM 1X
POL
CAL
RETINT
RET
RS170
EXIT