EOTech CNVD-T (SU-232/PAS) Clip-On Night Vision Device - Thermal - Manual (Page 46)

3-4
CAUTION ..
Creating too much tension with the locknut may
result in damage to the mounting bracket when the
throw-lever is forced against the weapon rail.
Creating too little tension with the locknut may
allow for movement of the CNVD-T on the rail.
Never completely remove the locknut from the
mounting bracket.
a. Swing the throw-lever closed (against the body of
the CNVD-T), then push in the lever lock to engage
the locking mechanism.
b. Using the provided 3/8” box wrench, adjust the
locknut using slight movements (2 or 3 degrees).
Turning the locknut counterclockwise will decrease
tension on the throw-lever. Turning it clockwise will
increase tension on the throw-lever.
Figure 3-1 Adjusting Throw-Lever Tension
c. Test each adjustment by attempting to mount the
CNVD-T to the weapon rail per section 2.3.1.
Locknut