EOTech CNVD-T (SU-232/PAS) Clip-On Night Vision Device - Thermal User Manual
Page 37
Advertising
2-21
Viewing live imagery from the CNVD-T on an external
monitor is accomplished as follows:
a. Remove the video jack plug (captive to the CNVD-
T2) from the video jack.
b. Plug the CNVD-T connector into the video jack.
c. Attach the BNC connector to an external monitor or
television.
d. Follow the CNVD-T startup procedures contained in
section 2.11 and ensure RS170 video format is
selected from the Main Menu as described in
paragraph 2.12.6.
e. Follow instructions provided by the manufacturer of
the monitor or television for viewing video from an
external device.
Advertising