EOTech CNVD-T (SU-232/PAS) Clip-On Night Vision Device - Thermal - Manual (Page 38)

2-22
SECTION III
ALIGNMENT / ZEROING
2.15 ZEROING ON A 25-METER RANGE
2.15.1 Clip-On .
WARNING ..
Activating ZOOM 2X when the CNVD-T is used in-
line with other optical sights may induce an error in
the aiming function of those devices.
When being used in-line with an optical sight, the CNVD-T
should be placed in ZOOM 1X, the reticle should be turned
off, and zeroing procedures associated with the primary sight
should be used. Placing the CNVD-T in front of an already
zeroed optic / weapon combination does not necessitate
rezeroing.
2.15.2 Stand-Alone . Each click of the CNVD-T reticle
moves the shot group about 2.8cm at 25m (when in ZOOM
1X). Other click equivalents are provided in Table 2-1.
Changing the position of the reticle corresponds to a
subsequent change in shot group movement (i.e., the UP
button will move the strike of the round up).
Table 2-1 Reticle Adjustments
Single Click Equivalents
10m 25m 100m 150m 300m
ZOOM 1X 1.1cm 2.8cm 11.0cm 16.5cm 33.0cm
ZOOM 2X 0.6cm 1.4cm 5.5cm 8.3cm 16.5cm