EOTech CNVD-T (SU-232/PAS) Clip-On Night Vision Device - Thermal - Manual (Page 34)

2-18
b. When in ZOOM 1X mode, the reticle is moved in
2-pixel increments each time the UP / DOWN / LEFT
/ RIGHT buttons are pressed. The reticle is moved
in 1-pixel increments when in ZOOM 2X mode. See
section 2.15 for click equivalents and zeroing
information.
Figure 2-14 Reticle Position Adjustment
2.12.5.2 Activating the OFF sub-menu item turns the reticle
off. Turning the reticle back on is accomplished by selecting
the RET menu item from the Main Menu.
2.12.6 RS170 / VGA . Activating the RS170 / VGA menu
item toggles between these two display formats. VGA
format is appropriate for high-motion viewing. RS170 format
is appropriate for all other applications. See section 2.14 for
instructions on how to connect the CNVD-T to an external
monitor for viewing live thermal imagery.
Figure 2-15 Menu – RS170 / VGA
POS ADJ
AZ 8 L
EL 2 U
ZOOM 1X
POL
CAL
RETINT
RET
RS170
EXIT