EOTech CNVD-T (SU-232/PAS) Clip-On Night Vision Device - Thermal User Manual

Page 41

Advertising
background image

2-25

f. Turn on the CNVD-T using the startup procedures in

section 2.11.

g. Align the CNVD-T reticle with the center of the target

per paragraph 2.12.5.

h. Fire a 3-round shot group and note the center of the

shot group relative to the designated strike point.

i. Adjust the position of the reticle to move the center

of the shot group to the designated strike point.

j. Fire another 3-round shot group and again observe

the center of the new shot group relative to the

designated strike point.

k. When 2 out of 3 rounds are in the designated strike

zone, the CNVD-T is aligned to be parallel with the

rail of the host weapon.

Advertising