ADC ACE-142S/142V - Manual (Page 12)

ADCP-96-015 • Issue 1 • July 2004
Page 6
© 2004, ADC Telecommunications, Inc.
2.3 Cabinet Installation Hardware
The cabinet is shipped with fasteners (see Table 4 ) for securing the ACE-142S/142V cabinet to
the FMS or the PMF.
2.4 Tools and Materials Required for Installation
The following tools and materials are required for cabinet installation:
All Installations
• 9/16-inch wrench
• Hammer
• Wire cutter
• Utility knife
• Screwdriver (flat blade)
• Tape measure
• Pen or marker
• 216B key tool (required to open cabinet door)
• Padlock (optional)
• Grounding system, copper wire, and grounding clamp (per local requirements)
• Splicing equipment for splicing OSP feeder and distribution cables
• Lifting equipment for hoisting the cabinet into position for mounting
Fiberglass Mounting Sleeve Installations
• Fiberglass Mounting Sleeve (FMS), FMS sleeve cover, FMS adapter cover (see Table 2 )
• Excavation and earth moving equipment
• Stone aggregate
• Tamping equipment
• Level
• Hole saw and drill (use to cut holes for cable conduit if pre-drilled holes are not usable)
• Landscaping equipment and site restoration supplies
Table 4. Cabinet Installation Fasteners
ITEM QUANTITY
3/8 x 1-inch hex head capscrews 4
3/8-inch flat washers 4
3/8-inch lock washers 4