Section 3.7.1 – ADC ACE-142S/142V User Manual
Page 17
ADCP-96-015 • Issue 1 • July 2004
Page 11
© 2004, ADC Telecommunications, Inc.
3.7.1
Mounting the ACE-142S Cabinet on the FMS-20000
Use the following procedure to mount an ACE-142 cabinet on the FMS-20000:
1. Install the FMS adapter cover onto the FMS and secure using the two capscrews and flat
washers provided with the cover as shown in
. Tighten each capscrews securely.
Figure 5. Mounting the ACE-142S Cabinet on the FMS-20000
Warning: Use appropriate lifting equipment when moving or installing the cabinet. Do not
stand under a cabinet as it is being hoisted into position for mounting. A failure of the lifting
equipment could result in serious personal injury.
FMS SLEEVE
COVER
FMS ADAPTER
COVER
FMS-20000
19607-B
ACE-142S
CABINET
(REAR)
FRONT
HEX BOLTS, FLAT
WASHERS, AND
NUTS (4 PLACES)
GROUND SPACER
(ACCESSORY)
CAPSCREWS, LOCK
WASHERS, AND FLAT
WASHERS (4 PLACES)