PowerTap Joule 3.0 - Manual (Page 12)

Joule 3.0 User Guide page 12
Charging Battery
The Joule 3.0 is powered by a user replaceable lithium-ion battery that can be recharged using
the included USB cable and a computer. A 5VDC 400mA charger can also be used (not included).
A fully charged battery can run for approximately 60 hours before it must be recharged. Recharg-
ing completely, via USB cable or AC adapter will take approximately six hours. The battery level is
indicated in the title bar. The Joule 3.0 is fully charged at the factory, but shipping and handling
may inadvertently consume charge. For more information see Important Precautions section on
page 38.
Chapter 1: Starting Out
1. Press in release [HOME] , [MODE] or [INTERVAL] to turn on Joule 3.0. Note: Pressing either [JOYSTICK] will not
turn Joule 3.0 on.
2. Plug the mini-USB cable into the mini-USB port on the back of Joule 3.0 and plug the other end into an avail-
able USB port on a computer.
3. A standard AC adapter to wall outlet is available separately.
4. Once connected to a computer or AC adapter, Joule 3.0 displays the connection and charge screen (charging
or charge complete). No data will be displayed.
Mini-
USB
port
Front of Joule Back of Joule
Battery
cover
HOME MODE INTERVAL RESISTANCE