PowerTap Joule 3.0 - Manual (Page 64)

Joule 3.0 User Guide page 64
Chapter 7: Setting Up CycleOps Joule 3.0 ™
Setting Up Joule™ Mode
1. Press and release [MODE] until Menu mode is displayed.
2. Press {JOYSTICK} up/down to highlight Setup Joule. Press [JOYSTICK] in and release to select Setup Joule.
3. Press [JOYSTICK] up/down to highlight Joule Mode. Press [JOYSTICK] in and release to select Joule Mode.
4. Press [JOYSTICK] in and release to select Record Control. Select between speed and HRM (heart rate
monitor) for record control. Speed setting starts recording when speed is detected. Heart rate setting starts
recording anytime heart rate is detected. Press [JOYSTICK] in and release to save changes.
5. Press [JOYSTICK] up/down to highlight Sleep Time. Press [JOYSTICK] in and release to select Sleep Time
from 1, 2,3,4 and 5. Note: sleep time designates how long Joule 3.0 stays on after not getting valid data to
record, such as after a ride. A longer sleep time will slightly effect battery life. Press [JOYSTICK] in and release
to save changes.
> Record Control >>>
Sleep Time: >
1 >
Power Avg (sec): >
1 >
Power Zeros: >
With >
Cadence Avg (sec): >
>
1
Speed Avg (sec):
>
1 >
Language: >
English >
Units: >
English >
Pair New Sensor >
Back <
Menu INT
CPU Mode
Speed Speed Speed