Chapter 7: setting up cycleops joule 3.0, Joule 3.0 user guide page 65 – PowerTap Joule 3.0 User Manual
Page 65
Joule 3.0 User Guide page 65
Chapter 7: Setting Up CycleOps Joule 3.0 ™
Setting Up Joule™ Data
Firmware version denotes the revision Joule 3.0 is operating on. Reference www.cycleops.com for
the latest version.
Firmware Version:
V
V
>
01:00
>
Odometer
>
>
Reset Odometer
>
90
>
Power Avg (sec):
>
Designed in:
>
Madison, WI by
>
Saris Cycling Group
>
800-783-7257
>
>
1
Speed Avg (sec):
>
1
>
Language:
>
English
>
Units:
>
English
>
Pair New Sensor
>
Back
<
Menu
INT
CPU Data
5
5
12356
1. Press and release [MODE] until Menu mode is displayed.
2. Press [JOYSTICK} up/down to highlight Setup Joule. Press [JOYSTICK] in and release to select Setup Joule.
3. Press [JOYSTICK] up/down to highlight Joule Data. Press [JOYSTICK] in and release to select Joule Data.
4. Press [JOYSTICK] up/down to view Joule 3.0 fi rmware version. Check for the latest updates through Power-
Agent software.
5. Press [JOYSTICK] up/down to highlight Odometer. Press [JOYSTICK] in and release to select Odometer.
The odometer can be changed for a desired start point and can be reset at any time. Press {JOYSTICK] up/
down to change. Press [JOYSTICK] in and release to save changes.