Chapter 14: definition of common training terms – PowerTap Joule 3.0 User Manual

Page 77

Advertising
background image

Joule 3.0 User Guide page 77

Chapter 14: Definition of Common Training Terms

Absolute Intensity
1. The actual intensity value. For example, 300 watts, 175 beats per minute, or a 7 on a 1 to 10 RPE
chart.

Angular Velocity
1. The rate at which a spinning object rotates. 2. How fast something is spinning in units of angle
per unit time such as degrees per second. 3. Angular displacement divided by elapsed time dur-
ing which the displacement occurs. 4. Cadence or the number of revolutions a rotating object
such as a pedal makes in a given time frame. 5. At the pedals or rear hub, power is equal to torque
multiplied by angular velocity, thus angular velocity is equal to power divided by torque.

Calorie
1. A unit of energy equal to that needed to raise the temperature of 1 gram or ml of water 1 ˚C. 2.
A measure of thermal energy or the energy released when a fuel or substrate is burned.

Category 1 to 4 Climb
1. A rating system used to rank the difficulty of a climb that is based on a combination of the
length, grade, and location of the climb on the course. A category 1 climb is considered the most
difficult while a category 4 climb is considered the least difficult.

Elevation
1. The total vertical distance in feet or meters above sea level where 1 meter is equal to 3.224 feet.

Endurance Zone
1. A moderate exercise intensity where there is some stress or strain on the body 2. On a 1 to 10
RPE scale, an intensity corresponding to 3 to 4 or “moderate” to “sort of hard”. 3. On a 6 to 20 RPE
scale, an intensity corresponding to a 10 to 13 or “fairly light” to “somewhat hard.” 4. An exercise
intensity depending on the aerobic metabolism of both fat and carbohydrate. 5. An exercise
intensity that can be held as long as the athlete were supplied with an influx of carbohydrate (i.e.,
allowed to eat).

Advertising