PowerTap Joule 3.0 - Manual (Page 61)

Joule 3.0 User Guide page 61
Backlight Level: >
2
Backlight Time (sec):
Contrast:
5
>
Zero averaging: >
With >
Power Avg (sec): >
1 >
Cadence Avg (sec): >
>
1
Speed Avg (sec):
>
1 >
Language: >
English >
Units: >
English >
Pair New Sensor >
Menu INT
Displa Displayy
10 10
Back <
13. Press [JOYSTICK] up/down to change Power With Zeros from Yes to No. Press [JOYSTICK] in and release to
save settings. Note: Power With Zeros set to Yes will calculate all average power data with zeros included, Power
With Zeros set to No will calculate all average power data only when pedaling. Press [JOYSTICK] in and release
to save changes.
14. Press [JOYSTICK] up/down to change Cadence Smoothing from 1, 2,3,5,10,30. Press [JOYSTICK] in and
release to save settings. Note: Cadence Smoothing 1 displays cadence data as it is sent from the cadence sensor,
Cadence Smoothing 30 displays cadence data as a 30 second rolling average which can be used for better pac-
ing during intervals and races. Press [JOYSTICK] in and release to save changes.
15. Press [JOYSTICK] up/down to highlight Cadence With Zeros. Press [JOYSTICK] in and release to select
Cadence With Zeros.
16. Press [JOYSTICK] up/down to change Cadence With Zeros from Yes to No. Press [JOYSTICK] in and release
to save settings. Note: CadenceWith Zeros set to Yes will calculate all average cadence data with zeros included,
Cadence With Zeros set to No will calculate all average cadence data without zeros or only while pedaling. Press
[JOYSTICK] in and release to save changes.
17. Press [JOYSTICK] up/down to change Speed Smoothing from 1, 2,3,5,10,30. Press [JOYSTICK] in and re-
lease to save settings. Note: Speed Smoothing 1 displays speed data as it is sent from the speed sensor, Speed
smoothing 30 displays speed data as a 30 second rolling average which can be used for better pacing during
intervals and races. Press [JOYSTICK] in and release to save changes.
Chapter 7: Setting Up CycleOps Joule 3.0 ™
Setting Up Display...continued