Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 281)

Troubleshooting PIM-SM Join/Prune
OmniSwitch Troubleshooting Guide September 2005 page 16-19
PIM: ----- PIM Header -----
PIM:
PIM: Version = 2
PIM: Message Type = 3(Join/Prune)
PIM: Reserved = 0
PIM: Checksum = 5794 (correct)
PIM:
PIM: *** Encoded-Unicast-Upstream Neighbor Address ***
PIM: Address family = 1 (IP (IP version 4))
PIM: Encoding type = 0
PIM: Unicast address = [192.168.12.1]
PIM: Reserved = 0
PIM: Number of groups = 1
PIM: Hold time = 210 (in seconds)
PIM:
PIM: *** Group # 1 ***
PIM:
PIM: *** Encoded-Multicast Group Address-1 ***
PIM: Address family = 1 (IP (IP version 4))
PIM: Encoding type = 0
PIM: Reserved = 0
PIM: Mask length = 32
PIM: Group multicast address = [225.1.1.1]
PIM: Number of joined sources = 1
PIM: Number of pruned sources = 0
PIM:
PIM: *** Encoded-Joined Source Address # 1 ***
PIM: Address family = 1 (IP (IP version 4))
PIM: Encoding type = 0
PIM: Reserved = 0
PIM: Flags = 07
PIM: .... .1.. = Sparse bit - PIM-SM