Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 511)

OmniSwitch Troubleshooting Guide September 2005 page -125
debug hre pcam
Displays all the PCAM entries known on a particular slot and slice.
debug hre pcam slot/slice
There are two possible arguments to this command - <start> and <count>. <start> is the PCAM index to
start with; default is 0. <count> is the number of entries to display; max is 24, default is 12.
Syntax Definitions
slot Specifies an NI slot number.
slice Specifies an NI slice (ASIC) number.
start The PCAM index to start with.
count The number of entries to display. The range is 0–24.
Defaults
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
OS-66000 series does not have a HRE so this commands is not supported on these switches.
Examples
-> debug hre pcam 11/0
*00005: e0000005 00000000 00000000 4c280000
[ip] dst=224.0.0.5
restart[mode=5], dakey=0000
*00012: e0000012 00000001 00000000 4c280000
[ip] dst=224.0.0.18
restart[mode=5], dakey=0001
0c000: 003d0001 c0a83d02 fff9015c 0c000000
[ipms] src=192.168.61.2, dakey=0001, sgid=03d, svpn=015c
forward[hdr=fff9]
0c001: 003c0001 c0a83c02 fff6015c 0c000000
[ipms] src=192.168.60.2, dakey=0001, sgid=03c, svpn=015c
forward[hdr=fff6]
0c002: 003b0001 c0a83b02 fff5015c 0c000000
[ipms] src=192.168.59.2, dakey=0001, sgid=03b, svpn=015c
parameter default
start 0
count 12