Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 540)

page -154 OmniSwitch Troubleshooting Guide September 2005
debug chassis hello timers
Enables and disables hello timers from the primary Chassis Management Module (CMM) to the second-
ary. If the secondary CMM does not respond back in the interval, it is rebooted.
debug chassis hello timers {enable | disable}
Syntax Definitions
enable Enables hello timers.
disable Disables hello timers.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
N/A
Examples
-> debug chassis hello timers disable
Release History
Release 5.1; command was introduced.
Related Commands
N/A