Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 570)

page -184 OmniSwitch Troubleshooting Guide September 2005
Output fields are described here:
Release History
Release 5.1; command was introduced.
Related Commands
MIB Objects
N/A
output definitions
Timestamp The timestamp indicating when the sysTrace log entry occurred. Values
can range from 0x00000000 through 0xffffffff.
AppID The Application ID for which the stored sysTrace log information is
displayed. Values can range from 0x00 through 0xff.
Trace Level The Severity Level for which the stored sysTrace log information is
displayed.
Task The Task for which the stored sysTrace log information is displayed.
Caller The function that called the sysTrace log.
Session ID The Session ID for which the stored sysTrace log information is dis-
played. Values can range from 0x00000000 through 0xffffffff.
Comment The condition that resulted in the sysTrace log entry.
debug ktrace Enables or disables kTrace logging.
debug ktrace appid level Adds or removes a kTrace capture level for a specified subsystem.
debug ktrace show Displays current kTrace parameters.
debug ktrace show log Displays kTrace log information.
debug systrace Enables or disables sysTrace logging.
debug systrace watch Enables or disables sysTrace log output to the console.
debug systrace appid level Adds or removes a sysTrace capture level for a specified subsystem.
debug systrace show Displays sysTrace debug log information.
show log pmd Displays the contents of a stored Post Mortem Dump (PMD) file.