Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 534)

page -148 OmniSwitch Troubleshooting Guide September 2005
debug command-info
Enables and disables the command-info mode.
debug command-info {enable | disable}
Syntax Definitions
enable Enables command-info mode.
disable Disables command-info mode.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
N/A
Examples
-> debug command-info enable
CLI command info mode on
Release History
Release 5.1; command was introduced.
Related Commands
N/A