Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 15)

OmniSwitch Troubleshooting Guide September 2005 page -xv
About This Guide
This OmniSwitch Troubleshooting Guide describes how to use Command Line Interface (CLI) and Dshell
commands available on the OmniSwitch 6600 Family, OmniSwitch 6800 Series, OmniSwitch 7700/7800,
and the OmniSwitch 8800 to troubleshoot switch and network problems.
Supported Platforms
This information in this guide applies to the following products:
• OmniSwitch 6624 (OmniSwitch 6600-24)
• OmniSwitch 6648 (OmniSwitch 6600-48)
• OmniSwitch 6600-P24
• OmniSwitch 6600-U24
• OmniSwitch 6602-24
• OmniSwitch 6602-48
• OmniSwitch 6800
• OmniSwitch 7700
• OmniSwitch 7800
• OmniSwitch 8800
Note. All references to OmniSwitch 6624 and 6648 switches also apply to the OmniSwitch 6600-P24,
OmniSwitch 6600-U24, OmniSwitch 6602-24, and OmniSwitch 6602-48 unless specified otherwise.
Unsupported Platforms
The information in this guide does not apply to the following products:
• OmniSwitch (original version with no numeric model name)
• Omni Switch/Router
• OmniStack
• OmniAccess