Protocol entry – Alcatel Carrier Internetworking Solutions 6648 User Manual

Page 373

Advertising
background image

OS6624/6648 Architecture

OmniSwitch Troubleshooting Guide

September 2005

page -49

3-Protocol Entry

Used to allow different rules to be applied for different protocols associated with same address. Proto-
col Offset Register is used to identify which protocols will be used in the system. Up to 18 Layer 2
protocols are supported. There is a separate protocol entry for each protocol defined in the Protocol
Offset Register

Priority level of the packet for queuing

Filter (6 bits), Mirror (5 bits), Priority (5 bits), TOS (6 bits) indices for flow-based rules. Each address
that is to be used in a flow definition is assigned a unique index for the appropriate rule (i.e. Filter,
Mirror, priority or TOS).

TOS marking rules

Global destination/source priority rules (i.e. all packets with this destination address get this priority).

Global destination/source filter rules (i.e. filter all packets with this source address)

Global destination/source mirror rule (i.e. mirror all packets with this source address)

Pointer to NetID

4-NetID Entry

Contains transmit enables, prepend information and address based VLAN information.

Advertising
This manual is related to the following products: