Generic troubleshooting in dshell, Event trace (stpni_traceprint), Generic troubleshooting in dshell -10 – Alcatel Carrier Internetworking Solutions 6648 User Manual

Page 90: Event trace (stpni_traceprint) -10

Advertising
background image

Generic Troubleshooting in Dshell

Troubleshooting Spanning Tree

page 4-10

OmniSwitch Troubleshooting Guide

September 2005

Generic Troubleshooting in Dshell

Note. Dshell commands should only be used by Alcatel personnel or under the direction of Alcatel.
Misuse or failure to follow procedures that use Dshell commands in this guide correctly can cause lengthy
network down time and/or permanent damage to hardware.

The stp_help command (executed from the NiDebug Dshell command prompt) displays the trace menu
for the Spanning Tree algorithm on NIs. Enter stpNI_help at ???? at what? Text missing here. ????

-> dshell
Working: [Kernel]->NiDebug
NiDebug>>stp_help
stpNISock_globals : Global variables
stpNISock_warningprint : warning trace
stpNISock_totraceprint : time-out trace
stpNISock_traceprint : event trace
stpNISock_intraceprint : inter-NI trace
stpNISock_boardupprint : boards up
stpNISock_printon : activates STP Socket Handler printf
stpNISock_printoff : desactivates STP Socket Handler printf
stpni_printStaFied : status field description trace
stpni_debugPport : Physical Port editing trace
stpni_debugLport : Logical Port editing trace
stpni_debugport : Physical & Logical Port editing trace
stpni_traceprint : event and warning trace
stpni_printon : activates STP NI printf
stpni_printoff : desactivates STP NI printf

These NI spanning tree trace utilities are described in the subsections that follow.

Event Trace (stpni_traceprint)

This trace includes the events received and generated by the Spanning Tree and the warning detected
while processing an event. A warning entry contains the name of the C source file and a line number. The
explanation of the warning can be given by Engineering.

Each event trace entry is built as follows:

An ASCII pattern reflecting the event.

Up to 4 parameters (a -1 (or 0xffffffff) indicates that the parameter is not significant).

The following is an example of the stpni_traceprint command printout:

Nidebug>> stpni_traceprint
64 - PVLANBLK (1,1000000,18,ffffffff)
65 - PORTATCH (19,1,ffffffff,ffffffff)
66 - PVLANBLK (1,2000000,19,ffffffff)
67 - PORTATCH (1a,1,ffffffff,ffffffff
68 - PVLANBLK (1,4000000,1a,ffffffff)
69 - PORTATCH (1b,1,ffffffff,ffffffff)
70 - PVLANBLK (1,8000000,1b,ffffffff)
71 - PORTATCH (1900001,1,ffffffff,ffffffff)
72 - PORTDELE (1,ffffffff,ffffffff,ffffffff)
73 - PORTATCH (1,1,ffffffff,ffffffff)

Advertising
This manual is related to the following products: