Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 91)

Troubleshooting Spanning Tree Generic Troubleshooting in Dshell
OmniSwitch Troubleshooting Guide September 2005 page 4-11
74 - PORTDELE (2,ffffffff,ffffffff,ffffffff)
75 - PORTATCH (2,1,ffffffff,ffffffff)
76 - LINK_UP (1,64,1,ffffffff)
77 - LINK_UP (2,64,1,ffffffff)
78 - LINK_UP (14,64,1,ffffffff)
79 - LINKDOWN (1,ffffffff,ffffffff,ffffffff)
80 - LINKDOWN (2,ffffffff,ffffffff,ffffffff
81 - LINK_UP (1,64,1,ffffffff)
82 - LINK_UP (2,64,1,ffffffff)
83 - AGGR_UP (1,120,2e,ffffffff)
84 - Warning File:stpni_bpduEvt.c line:744
85 - PORTJOIN (1,121,ffffffff,ffffffff)
Event names displayed by the stpni_traceprint command are described in the subsections that follow.
PORTATCH
This corresponds to a port attached event received from the Spanning Tree CMM. The Spanning Tree
CMM generates this event when it receives a Port attach indication from the Port Manager.
The parameters are:
• First parameter: Global port identifier.
• Second parameter: Default VLAN associated to the port.
PORTDELE
This corresponds to a port detach event received from the Spanning Tree CMM. The Spanning Tree CMM
generates this event when either it receives a Port detach indication from the Port Manager or there is
change in the port type (e.g. transition from aggregable to fixed, mobile to fixed).
• First parameter: Global port identifier.
ADDVLAN
This event is generated by the Spanning Tree CMM when it receives a VLAN added event from the
VLAN Manager. This events is sent to all the NI that are up and running by the Spanning Tree CMM.
The parameters are:
• First parameter: The VLAN identifier.
• Second parameter: The Spanning Tree type. A 1 indicates Flat Spanning Tree while a 2 indicates 1x1
Spanning Tree.
• Third parameter: The VLAN administrative state. A 1 indicates Enable while a 2 indicates Disable.
• Fourth parameter: The Spanning Tree administrative state. A 1 indicates Enable while a 2 indicates
Disable.