Aurora Electronics MAGNETEK PVI-3600-OUTD-UK-F-W - Manual (Page 16)

Installation and Operator’s Manual Page 16 of 63
(PVI-3600-OUTD-UK-F-W Rev.: 1.0)
WARNING: The connection of AURORA to the electrical distribution
grid must be performed only after receiving authorization from the utility
that operates the grid.
3.1 Package Inspection
NOTE: The distributor presented your AURORA WIND Inverter to the
delivering carrier securely packed and in perfect condition. Upon
acceptance of the package from the distributor the delivering carrier
assumes responsibility for its safe arrival to you. Regardless of the
attention paid by carrier in handling it, sometimes the package and its
contents might be damaged.
Please, carry out the following checks:
Examine the shipping box for any visible damage: punctures, dents or any
other signs of possible internal damage;
Describe any damage or shortage on the receiving documents and have the
carrier sign their full name;
Open the shipping box and inspect the contents for internal damage. While
unpacking, be careful not to discard any equipment, parts or manuals. If any
damage is detected, call the delivering carrier to determine the appropriate
action. They may require an inspection. Save all shipping material for the
inspector to see!
If the inspection reveals damage to the inverter call your supplier, or
authorized distributor. They will determine if the equipment should be
returned for repair. They will also provide instructions on how to get the
equipment repaired;
It is your responsibility to file a claim with the delivery carrier. Failure to
properly file a claim for shipping damages may void warranty service for any
physical damages later reported for repair;
Save the AURORA original packaging, as it will have to be used in case the
equipment has to be shipped out for repairs, or the responsible inspector
requires it.