Aurora Electronics MAGNETEK PVI-3600-OUTD-UK-F-W - Manual (Page 32)

Installation and Operator’s Manual Page 32 of 63
(PVI-3600-OUTD-UK-F-W Rev.: 1.0)
5 MONITORING AND DATA TRANSMISSION
5.1 User’s Interface Mode
WARNING: RS-485 cable must be UL/CSA certified wiring and
must be additionally protected by means of a non-metallic tubing.
The AURORA inverter usually works automatically and is maintenance-free.
When the wind speed is not high enough to provide power for export to the grid
AURORA disconnects automatically, and enters the stand-by mode, waiting to
start working again. The operational cycle is automatically restored as soon as the
wind speed is high enough.
AURORA inverter can provide operational data in the following ways:
LED indicators
Operational data on the LCD display
Data transmission on a dedicated serial RS-485 line. The data can be
collected by a PC or data logger equipped with a suitable RS-485 port or with
the optional RS-485/RS-232 AURORA serial interface converter, or by
AURORA Easy Control data logger*.
Data transmission on the Ac grid by means of a dedicated Power Line
Modem (PLM). The data can be collected by a PC equipped with the optional
PLM adapter., or by AURORA Easy Control data logger*.
*Check on availability with Factory.
Please check web site
www.alternative-energies.com for updated information