Outback Power Systems GS Load Center Installation Manual - Manual (Page 7)

900-0123-01-00 Rev C 5
Introduction
Welcome to OutBack Power Technologies
Thank you for purchasing a GS Load Center (GSLC) from OutBack Power Technologies. The GSLC is
part of an OutBack Grid/Hybrid™ system. It is a balance-of-systems enclosure intended to work with
Radian Series (GS) inverter/chargers, FLEXmax Charge Controllers, and an OutBack HUB
Communications Manager.
Figure 1 GS Load Center (GSLC)
The product is designed in the following configurations:
 GSLC – GS Load Center for Radian Series. Recommended for custom-built systems. Recommended for use
with multiple Radian inverters (one GSLC per inverter). Can be used with other inverter models. The term
“GSLC” is also used to refer generically to the product line.
∼ Intended for any Radian model.
 GSLC175-120/240 – GS Load Center for AC applications (split-phase). Factory-prepared with dual 175 Adc
inverter circuit breakers, dual AC inputs, and 120/240 Vac maintenance bypass assembly. Recommended for
systems which have a single Radian inverter and an AC source, but can be customized in other ways.
∼ Intended for Radian models GS8048 and GS8048A.
 GSLC175-230 – GS Load Center for AC applications (single-phase). Factory-prepared with dual 175 Adc
inverter circuit breakers, dual AC inputs, and 230 Vac maintenance bypass assembly. Recommended for
systems which have a single Radian inverter and an AC source, but can be customized in other ways.
∼ Intended for Radian model GS7048E.
The removable front cover allows for opening from either side of the enclosure.