Outback Power Systems GS Load Center Installation Manual - Manual (Page 9)

Introduction
900-0123-01-00 Rev C 7
GSLC – Components
Figure 3 GSLC Components
Inverter Negative (–) DC Bus Bars
Negative (–) Terminal Bus Bar (TBB-WHITE)
Ground TBB (TBB-GROUND)
Neutral TBB (TBB-WHITE)
PV Positive (+) TBB (TBB-RED)
Shunt (FW-SHUNT500)
NOTE: The installed Neutral TBB has white insulators
(TBB-WHITE). A set of blue insulators (TBB -BLUE) is included
in the kit for locations where blue is standard.
The DC Positive (+) Bus Plate (FW-BBUS) and the other
inverter positive (+) DC bus bars are also included in the kit.
Legend