Outback Power Systems GS Load Center Installation Manual - Manual (Page 8)

Introduction
6 900-0123-01-00 Rev C
 GSLC175-PV-120/240 – GS Load Center for PV and AC applications (split-phase). Factory-prepared with
dual 175 Adc inverter circuit breakers, dual AC inputs, 120/240 Vac maintenance bypass assembly, PV GFDI,
and two PV array inputs, FLEXnet DC battery monitor and three shunts. Intended as a “plug-and-play”
solution for systems with a single inverter, two FLEXmax charge controllers, and battery monitoring.
∼ Intended for Radian models GS8048 and GS8048A.
 GSLC175-PV-230 – GS Load Center for PV and AC applications (single-phase). Factory-prepared with dual 175 Adc
inverter circuit breakers, dual AC inputs, 230 Vac maintenance bypass assembly, PV GFDI, two PV array inputs, FLEXnet
DC battery monitor, and three shunts. Intended as a “plug-and-play” solution for systems with a single inverter, two
FLEXmax charge controllers, and battery monitoring.
∼ Intended for Radian model GS7048E.
 GSLC175PV1-120/240 — GS Load Center for PV and AC applications (split-phase). Factory-prepared with one 175 Adc
inverter circuit breaker, dual AC inputs, 120/240 Vac maintenance bypass assembly, PV GFDI, one PV array input,
FLEXnet DC battery monitor, and two shunts. Intended as a “plug-and-play” solution for systems with a single inverter,
one FLEXmax charge controller, and battery monitoring.
∼ Intended for Radian model GS4048A.
 GSLC175PV1-230 — GS Load Center for PV and AC applications (single-phase). Factory-prepared with one 175 Adc
inverter circuit breakers, dual AC inputs, 230 Vac maintenance bypass assembly, PV GFDI, one PV array input, FLEXnet DC
battery monitor, and two shunts. Intended as a “plug-and-play” solution for systems with a single inverter, one FLEXmax
charge controller, and battery monitoring.
 Intended for Radian model GS3548E.
Figure 2 GS Load Center with Devices
The enclosure provides mounting holes for the HUB Communications Manager on the left.
On the right, the enclosure has mounting holes for brackets to mount up to two FLEXmax charge controllers.
NOTE: OutBack FLEXmax Extreme charge controllers do not mount directly to the GSLC and do not require
additional mounting brackets. They are mounted beside the inverter or the GSLC. See the Radian Series Installation
Manual for more information.