Sandvik Coromant Parting and grooving - users guide - Manual (Page 13)

11
-5E
-4E
-5F
Q-Cut 151.2 – for deep parting
Q-Cut 151.2 is recommended for deep parting operations. The V-clamped 1-edged insert is
ideal for parting operations. Together with parting blades, cutting depths of up to 55 mm are
possible.
Parting geometries
Finishing
Low feed
7E
Medium
Medium feed
5E
Roughing
High feed
4E
Sharp 5F
Optimised
Chip control
9E
Q-cut insert parting geometries
Inserts
Choose from a programme of insert widths
from 2-8 mm.
Geometries
Dedicated geometries for parting
7E, 5E, 4E, 5F and 9E..