Sandvik Coromant Parting and grooving - users guide - Manual (Page 4)

2
Simple and smart recommendations
for parting and grooving operations
More in-depth information, including practical hints is shown under each chapter.
For cutting speed, see page 74.
CR
GC2135
125 m/min
0.12 mm/r
Parting
of bar
Geometry:
Grade:
Cutting speed:
Feed:
More info:
Page 20
CM
GC1125
125 m/min
0.12 mm/r
Parting
of tube
GM
GC1125
150 m/min
0.1 mm/r
Grooving
Page 27
Values for insert width 3 mm.
TM
GC4025
150 m/min
0.12/0.2*
Turning
Geometry:
Grade:
Cutting speed:
Feed:
More info: Page 33
154.0
GC1020
150 m/min
0.08 mm/r
Circlip grooving
Page 35
RO
GC1125
150 m/min
0.07 mm/r
Undercutting
Page 39
*Radial feed 0.12, axial feed 0.2.
GM
GC1125
125 m/min
0.07 mm/r
Internal grooving
Geometry:
Grade:
Cutting speed:
Feed:
More info: Page 40
TF
GC4125
125 m/min
0.1/0.15*
mm/r
Face
grooving
Page 36
RM
GC1125
150 m/min
0.2 mm/r
Profiling
Page 42
Values for insert width 3 mm. *Radial feed 0.1, axial feed 0.15.
Page 23