Sandvik Coromant Parting and grooving - users guide User Manual
Page 19
Advertising
17
CoroMill 327 – grooving cutter for milling
applications
CoroMill 327 is intended for circlip grooving, T-slots milling and all other slot milling opera-
tions. CoroMill 327 is based on a sharp 3-edged insert together with a rigid screw clamping.
The inserts produce grooves in holes of diameter ≥10 mm and width from 0.7–5.15 mm.
Weldon shanks in steel and carbide for different overhangs are available.
Advertising