Sandvik Coromant Parting and grooving - users guide - Manual (Page 50)

48
CoroTurn HP
– High pressure coolant
In order to achieve chip-breaking in tita-
nium alloys and to prolong tool life or
to have increased productivity due to
higher feeds we recommend to install high
pressure coolant in your machine.
Accurate coolant jets with laminar parall-
lel flow, are easily channeled through the
Coromant Capto® coupling.
The jets produce a hydraulic wedge, lift-
ing the chip, reducing the temperature and
improving the chip control. See the illustra-
tion.
Contact your local Sandvik Coromant
salesman for more information.
Standard Coolant
70 bars HPC
Steel
SS1672
CNMG 120408-PF
4225 Stainless steel
Sanmac 316L
CNMG 120408-MF
2025 Titanium
Ti6Al4V
CNGP 120408
H13A HRSA
Inconel 718
CNGP 120408
S05F Aluminum
Alumec
CNGP 120408
H13A