Vaisala FD12P - Manual (Page 132)

User's Guide _______________________________________________________________________
132 _____________________________________________________ M210296en-A
The parameters controlling the operation mode (automatic or polling),
message type, and weather type decision thresholds are also stored in
the EEPROM. If the processor board is replaced, these parameters
should also be checked and updated. The parameters and commands
are listed in Table 28 on page 132.
Table 28 Parameters and Commands
Parameter Checking Command Changing Command
Sensor ID PAR CONF
Message type
Sending mode
PAR AMES
Weather parameters WPAR WSET