Alliance Laundry Systems 70444901R3 - Manual (Page 16)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Entering the Manual Mode
70444901 14
Manual Mode: Enter by pressing
Stop ( ), then Back ( ), then
Up ( ) keypads
“Prog”
Manual
Programming
“Avdit”
Manual Read
Audit
“rESEt”
Manual Reset
“diAg”
Diagnostic
Tests
Press the Up ( ) or
the Down ( ) keypad
to scroll through the
Manual Mode options.
Press the Start ( / ) keypad to
enter Manual Programming.
Refer to Manual
Programming flowchart.
“CyCLE”
Total machine cycles
“totHrS”
Total Run Hours
“rA CyC”
Total Rapid
Advance Cycles
“HEAtHr”
Total Heat Hours
Press the
Up ( )
or the
Down ( )
keypad to
scroll through
the Audit
options.
Press the
Start ( / ) keypad.
Press the Start ( / )
keypad to reset control.
Press the Start ( / ) keypad to
enter Diagnostic Tests. Refer to
Diagnostic Tests flowchart.
TMB1372R
Press the Start ( / )
keypad to read audit.
“Ab CyC”
Total Aborted Cycles
“End2OP”
Average Time From End
of Cycle to Door Open
“AntiCt”
Total Time
Anti-wrinkle Exceeded
To enter a programming
option, press the Start ( / )
keypad. To exit, press
the Back
( ) keypad.
Press the Start ( / )
keypad to read audit.
Press the Start ( / )
keypad to read audit.
Press the Start ( / )
keypad to read audit.
Press the Start ( / )
keypad to read audit.
Press the Start ( / )
keypad to read audit.
Press the Start ( / )
keypad to read audit.
“End2St”
Average Time From End
of Cycle to Run Mode
Press the Start ( / )
keypad to read audit.
TMB1372R