Alliance Laundry Systems 70444901R3 - Manual (Page 28)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 26 70444901
Manual Reset
This feature allows the owner to reset the tumbler
control’s programming data to the factory default
settings by pressing a sequence of pads on the control.
For an explanation of the Factory Default Settings,
refer to Default Tumbler Settings.
How to Enter Manual Reset
1. Control must be in Manual Mode to start.
Refer to Entering the Manual Mode.
2. Press the Up ( ) or the Down ( ) keypad until
“  ” appears.
3. Press the Start ( ) keypad. The control will
be blank until the programming is complete.
Once the program has been reset, the control will
revert back to the Manual Mode, displaying
“  ”.