Alliance Laundry Systems 70444901R3 User Manual

Page 32

Advertising

Testing Machine and Electronic Control Functions

70444901

Dip Switch Status

The control will show the displays in Table 4

according to the DIP switch configuration. The control

will show which switches are in the ON position.

Table 4

ICM Alarm Status

This option shows the status of the ICM (Ignition

Control Module) Alarm.
To start test, control must be in the Testing Mode.

Refer to “How to Enter Testing Feature” at the

beginning of this section.
To enter, press the Start (

) keypad. The display

will show “

 

” if the alarm is active for at least

one second or “



” if the alarm is not active for

one second.
To exit the test, press the Back ( ) keypad. The

control will return to the testing mode.

ICM Reset Test

The ICM Reset Test can be used to both activate the

ICM alarm signal and reset the ICM alarm. When this

test is started, the ICM reset will become active. If the

reset signal is active for a long enough period of time

(4 seconds) the ICM Lockout input will become

active. To reset the ICM, stop the ICM Reset Test and

then start the test again until the ICM Lockout input

becomes inactive (4 seconds) and then stop the ICM

Reset Test. If “



” shows on the display, ICM

Reset output is active.

External Alarm Test

This option tests whether the external alarm is

working.
To start test, control must be in the Testing Mode.

Refer to “How to Enter Testing Feature” at the

beginning of this section.
To enter, press the Start (

) keypad. The display

will show “



” and the external alarm will

sound until the test is exited.
To exit this test, press the Back ( ) keypad. The

control will return to the testing mode.

DS8

DS7

DS6

DS5

DS4

DS3

DS2

DS1

Display

OFF



OFF



OFF



OFF



OFF



OFF



OFF



OFF



OFF



Advertising

Popular Brands

Popular manuals